Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 181 / 316

BVS ID-M1280xF1-xx-xxx
english 23
•
•
•
•
•
2.3.1.1 Overview of inspection results
The table on the left shows the list of inspection results. Each inspection results consists of
inspection result,
a result number,
found codes,
date of image acquisition and
execution duration (the execution duration does not comprise time that is spent on waiting for a trigger,
camera exposure time or writing reports to a server)
2.3.1.2 Analysis of single inspection results
By clicking on a single inspection result (list item) the complete result of that inspection is shown. This will
deactivate the LIVE mode automatically. The LIVE mode can be reactivated at any time.
If the LIVE mode is deactivated and if there are new inspection runs triggered in the background, they may
overwrite the images of older inspections and thus it may happen that there is no longer an image available for
certain old inspection results. In any LIVE mode state, the statistic is always updated.
While an inspection result is selected and the image is available in the image buffer, the image can be saved to
the camera by clicking the camera icon on the left.
NOTE
All inspection results are stored in a ring buffer in the main memory (RAM). After rebooting these results
are lost. Please use the function
IIOT Reports in System Settings to store results. The ring buffer can
hold up to 20 OK results and 20 NOK results.
