Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 248 / 316

BVS ID-M1280xF1-xx-xxx
90 english
•
•
Via the Job End -bit, the PLC recognizes that a response has been sent and the data is valid.
The PLC deletes the Job -bit.
BVS ID deletes the Job End -bit and Job Start -bit.
Via the PLC the BVS ID can be controlled by signals of the bit bar in each control cycle if the corresponding
conditions (e.g..: Ready , Waiting for Trigger, .. ) are present.