Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 185 / 316

BVS ID-M1280xF1-xx-xxx
english 27
Parameters
Parameters Description Data type
Active Activates or deactivates the reading of a reference value. Bool
String length Number of bytes representing the characters of the reference value. Uint16
New reference per test
cycle
If New reference per cycle is activated, the input buffer representing the read in reference
value is deleted after completion of an inspection program run. The reference value can
thus no longer be used in the following inspection program run.
If New reference per cycle is deactivated, the reference value is reused until it is
overwritten by a newly received data container.
Bool
NOTE
Changing between configuration and monitor mode causes the reference value to be discarded if New
reference per cycle is activated. If it is deactivated the reference value is retained in this case.
Changing the inspection program, causes the reference value to always be discarded. For every new
inspection program a new data container has to be sent.
