Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 273 / 316

BVS ID-M1280xF1-xx-xxx
english 115
Mapping of the total code quality to the signal quality
The individual code qualities A, B, C, D, E, F are mapped to integer signal quality values as follows:
Code quality value Signal quality value
A 100%
B 80%
C 60%
D 40%
E 20%
F 0%
Process Data
Object ID Name Description Direction
0x0020 (32) Current Signal Quality Output of the current signal quality in percent steps from 0% to 100%. Input
0x0021 (33) Signal Quality Bad
Output of the current signal quality evaluation; TRUE means a signal quality
below the threshold value, FALSE means a signal quality equal to or above the
threshold value
Input
ISDU
Name Index
Subinde
x
Acces
s
Length Data Type
Data
Storage
Default
Low Signal Quality
Threshold
0x00C
E (206)
0 R/W 1 bytes UINT8 Yes 0
Signal Quality
0x00C
F (207)
0 R 2 bytes n/a
Current Signal Quality 1 R 1 byte UINT8 n/a -
Signal Quality Bad 2 R 1 Bit BOOL n/a -
Low Signal Quality Threshold
The threshold value for low signal quality can be set to monitor the current signal quality. It is displayed as a
value between 0 and 100 in percent. If the current signal quality value drops below the signal quality threshold
value, the Low Signal Quality Level warning is output.
The function can be deactivated by setting the threshold value to zero.
Current Signal Quality
The current signal quality is displayed as a value between 0 and 100 in percent. If no valid signal quality is
available, the value is set to 255.
Signal Quality Bad
The status of the signal quality is displayed as a Boolean value. If the value is TRUE, the signal quality is below
the threshold value; if the value is FALSE, the signal quality is equal to or greater than the threshold value. This
status is visualized by an orange LED that illuminates if the value is
TRUE.