Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 207 / 316

BVS ID-M1280xF1-xx-xxx
english 49
1.
a.
b.
2.
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
4.1.2 Communication sequence
4.1.2.1 Example: Trigger inspection
4.1.3 Message structure
Most message elements are of type UINT16 and consist of 2 bytes. But over Ethernet one byte after the other is
sent. The messages are transferred using the little-endian format. This means the lowest value byte is
transferred first.
Each message begins with the message ID.
There are two different types of messages:
Event messages from BVS ID
Status message
Result container
Request messages to the BVS ID replying with a response message
Connect
Disconnect
Get status
Reset errors
Get inspection program ID
Set inspection program ID
Get date and time
Set date and time
Set reference data
Trigger inspection
NOTE
If the trigger mode is set to continuous in BVS ID, it will not wait for a trigger and executes the
inspection in a loop. Using edge, the camera waits for a trigger. Here you have to query the
Waiting for
Trigger state.
