ENGLISH
Quick Install Guide
Wired Network Camera/Wireless N Network Camera
Thank you for purchasing the DCS-1100/DCS-1130 Network Camera. Follow the easy
steps in this guide to properly set up your adapter. Please verify that all the package
contents below are available.
DCS-1100/1130
If any of the above items are missing, please contact your reseller.
Technical Support
Having trouble installing your new product? D-Link’s website contains the latest
user documentation and software updates for D-Link products. U.S. and Canadian
customers can contact D-Link Technical Support through our website or by phone.
United States
Telephone:
(877) 453-5465
Internet:
http://support.dlink.com
Canada
Telephone:
(800) 361-5265
Internet:
http://support.dlink.ca
Copyright ©2010 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries.
Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g and
802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network
traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will
adversely affect wireless signal range. Product specifications, size and shape are subject to change without notice, and actual product
appearance may differ from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details.
Version 1.0 | June 10, 2010 6DCS1100Q.02G
Package Contents
DCS-1100 Wired Network Camera / DCS-1130 Wireless N Netowrk Camera
Camera Base and Mounting Kit
CAT-5 Ethernet Cable
Power Adapter
CD with drivers and software
• An Internet connection
• A router connected to your broadband router
• A PC running Windows
®
XP or Vista
®
(32/64-bit) with Internet Explorer
®
6 or higher
and ActiveX
®
controls enabled
System Requirements
Step 1:
Insert the DCS-1100/1130 Driver CD in the CD-ROM drive.
Note:
Vista
®
users will need to be logged in to an account with administrative
access to use the D-Link Installation Wizard.
If the CD Autorun function does not automatically start on your computer, go to
Start
>
Run
. In the run box type “
D:\autorun.exe
” (where D: represents the drive
letter of your CD-ROM drive) and click
OK
. When the autorun screen appears, click
Install
and follow the on-screen instructions.
Step 2:
Click on the
Start
button to start the wizard, and follow the instructions from the
Installation Wizard to finish setting up your camera.
Step 3:
Open Internet Explorer and go to http://www.mydlink.com, and sign into mydlink.
Step 4:
Select your camera from the device list, and your camera’s Live View will appear.
Installation
1. What can mydlink.com do for me?
mydlink.com provides users with a quick and easy way to view or manage
multiple cameras over the Internet. You can add your camera to your
mydlink.com account after running the Installation Wizard. Users can sign in to
mydlink and access their devices under their account from a PC connected to the
Internet anytime, anywhere.
2. What is mydlink No.? What is it used for?
Each camera has a unique 8-digit mydlink No. which will be shown on the label
on the back of your camera. This 8-digit number identifies your device, and is
required to add your device to your mydlink.com account.
3. What can I do if my DCS-1100/1130 is not working correctly?
• Try using the wizard on the included CD.
• To make sure your hardware is installed correctly, make sure that:
- the front LED is lit solid green
- your Internet connection is working
Troubleshooting
- your router’s LAN & WAN connections are ok
- your router supports UPnP
®
- your camera is on the same network as your PC
- both your PC and camera have a working Internet connection
• If your camera is still not working, check your router and make sure it is using
the latest firmware.
4. I cannot run the CD wizard. How do I install my DCS-1100/1130?
You can install your camera by using the online wizard:
• DCS-1100: http://dcs-1100.mydlink.com
• DCS-1130: http://dcs-1130.mydlink.com
5. I cannot run the CD wizard. How do I install my DCS-1100/1130?
• Connect the camera directly to the computer’s Ethernet port.
• Assign your computer a static IP address within the same range as the
camera, such as 192.168.0.113.
• Access and set up your camera via the default IP address of
http://192.168.0.20.
• For more information, please refer to the User Manual.
Note:
If you do not have a router, you will not be able to remotely access
your camera.
