Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 253 / 316

BVS ID-M1280xF1-xx-xxx
english 95
4.3.5.2 Get Inspection ID
This command queries the current inspection program number from the BVS ID.
Command:
Sub address Data Meaning
n+00 0x02 1st bit string (Job Start)
n+01 0x02 Get Inspection ID
n+02
n+03
…
n+31 0x02 2nd bit string
Response:
Sub address Data Meaning
n+00 Status byte
n+01 Error byte
n+02 0x02 1st bit string (Job Start)
n+03
CMD status:
0x02 Command was executed successfully.
0x10 An error occurred when requesting the inspection ID.
0x16
The application is currently in a state in which requests cannot be processed (Not-Ready
status).
n+04 0x04 User data length byte 0
n+05 0x00 User data length byte 1
n+06 ID0 Inspection ID byte 0
n+07 ID1 Inspection ID byte 1
n+08 ID2 Inspection ID byte 2
n+09 ID3 Inspection ID byte 3
…
n+31 0x02 2nd bit string