Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 289 / 316

BVS ID-M1280xF1-xx-xxx
english 131
Device Temperature Alarm Configuration
Setting for the lower threshold value (in °C) for the device temperature warning (0x8D20) and upper threshold
value (in °C) for the device temperature warning (0x8D10).
Events
Event
Code
Event Type Event – Description – Remedy Device Status
0x4000
(16384)
Error
Temperature Fault – Overload – The BVS ID is operated outside
of the device-specific temperature limits. Risk of device
damage.
4 – Failure
0x4210
(16912)
Warning
Device Temperature Overrun – Clear Heat Of Source – Risk of
device damage. The BVS ID is too hot.
→
Remove heat source, provide the BVS ID e with heat
insulation if necessary.
2 – Out-of-Specification
0x4220
(16928)
Warning
Device Temperature Underrun – Insulate Device – Risk of device
damage. The BVS ID is too cold.
→ Insulate the BVS ID.
2 – Out-of-Specification
0x8D10
(36112)
Warning
Device Temperature Upper Warning – The set upper
temperature warning threshold has been exceeded.
0 – Device is operating properly.
0x8D20
(36128)
Warning
Device Temperature Lower Warning – The set lower
temperature warning threshold is below the minimum value..
0 – Device is operating properly.
Variant Dependence
The functionality is available in all variants.