Balluff BVS ID-M1280 F1 Series, Configuration Manual

Page: 189 / 316

BVS ID-M1280xF1-xx-xxx
english 31
•
•
•
Parameters Description Data type
Code types 1D
List with types of bar codes (1D) that are searched in the image. All other bar codes are
ignored during the search.
[Bool]
Code types 2D
List with types of matrix codes (2D) that are searched in the image. All other matrix codes
are ignored during the search.
[Bool]
Reader mode ( 2D)
Determines how 2D codes are searched and effects the reading and detection rate. There
are three settings:
Robust:
Recognizes all detectable codes the system knows. However, this mode needs
processing power and has a moderate reading rate, but the detection rate is very
high.
Balanced (Standard):
This mode is a compromise between Robust and Fast and allows finding reliably
codes although there are slight code differences concerning e.g. the structure.
Fast
Offers a good reading rate. However, codes may not be detected whose
parameters like height, width, size, distortion, etc. differ from the usual values. In
this mode, codes are only detected if their symbols are darker than the
background.
Enum
NOTE
This selection is set automatically when the auto setup process is completed
successfully. Code types "Pharma Code" and "MSI" are not supported by the
auto setup process.

NOTE
This selection is set automatically when the auto setup process is completed
successfully. Please note that the auto setup process only identifies code types
"Datamatrix ECC 200" and "QR Code".

NOTE
Only the codes specified in " Code types 2D " will be searched. The chosen
search mode does not matter.

NOTE
For stable decoding of bar codes , the resolution must be set to a minimum of 2 pixels per bar
code stripe .
For reliable assessment of code quality , the resolution must be set to a minimum of 3 pixels per
bar code stripe .

NOTE
For stable decoding of 2D code types , the resolution must be set to a minimum of 4 pixels per
module . For PDF417 code type, 3 pixels per module are sufficient. To read the smallest code type
( Micro QR Code , consisting of 11 modules) the code has to have a minimum size of 44 * 44 pixels.
