1
www.observint.com
ALI-TP2118VR_CQ
180409
Drop cable
Product
label
Camera module back
What’s in the box
•
Camera assembly
•
Mounting hardware
•
Video test adapter cable
•
Security L-wrench
•
Drill template
•
This instruction guide
Tools you need
To install the camera, you will need:
•
12 Vdc or 24 Vac power source. See
Specifications
for requirements.
•
Tools and additional fasteners (may be required) for mounting the camera
•
Caulk or other sealant for outdoor installation
•
Video and power extension cable
Step 1. Install the camera
The camera includes hardware to install it directly to a mounting surface. You can also easily install the
camera onto a single- or double-gang electrical box. Camera drop cables can be routed through the
conduit port on the side of the camera back box, through the mounting surface or into an electrical box, if
used.
Before installation:
•
Make sure that the device is in good condition and all the assembly parts are included.
•
IR Reflection Prevention
: Avoid mounting the camera near reflective surfaces. The IR light from
the camera can reflect back into the lens. Do not remove the plastic cover until the cover is installation
is complete.
•
Check the specification of the products for the installation environment.
•
Make sure that the wall or the ceiling is strong enough to withstand 3 times the weight of the camera.
•
To avoid fire or shock hazard, use only UL listed power supplies. Verify that the power supply will
provide the rated voltage and wattage for the camera. See the
Specifications
section.
ALI-TP2118VR 8MP HD-TVI
Vandalproof Outdoor Dome Camera
Quick Installation Guide
The ALIBI ALI-TP2118VR dome camera include a high resolution CMOS array sensor with and advanced
circuit design technology. This camera features:
•
8 MP high performance CMOS array with resolution up to 3840 (H) × 2160 (V) pixels
•
Low illumination 0.003 Lux color illumination
•
2.8 mm
−
12 mm motorized lens
•
OSD menu up-the-coax
•
260 ft IR
•
IP67 weatherproof, IK10 vandalproof enclosure
•
Requires Alibi 8 MP HD-TVI compatible recorder (HD-TVI DVR) such as the ALI-QVR5116H
•
Optional installation with wall mount bracket ALI-AB2 and flange adapter ALI-AF3
Camera
back
box
Cable
channel
Lens
Captive
screw (3)
Camera
dome
assembly
Back Box internal features
Power Connector
12 Vdc polarity
HD-TVI video
BNC connector
CVBS video BNC connector
Camera drop cable connectors
OSD
joystick
IR LED (2)
Foam
ring
seal
Lens
CVBS video
test port
Hole for
camera to
back box
screws (3)
Hole for
dome
tether
screw
Hole for
dome
assembly
screws (3)
Camera module internal features
