Printed in Japan
PSQX2699YA
KK0302RM1112
Getting Started
Model No.
KX-HCM10
Please read the Operating Instructions for the details.
Keep this leaflet for the future reference.
The suffix of each model number is omitted.
Included Accessories
Network Camera
If any items are missing, please contact the dealer immediately.
Note
Network Camera Configuration Type
The Network Camera can be connected over the LAN/Intranet and the Internet. Please select from
the four Network Camera configuration types. Network parameters differ depending on the Network Camera
configuration type.
Network Camera can be installed on the LAN/Intranet.
[Type 1]
LAN/Intranet Connection with an
Ethernet
®
Switching Hub
LAN/Intranet
Ethernet switching hub*
1
*
1
Network traffic can be smooth by using the Ethernet switching
hub.
Network Camera can be accessed from the Internet.
The broadband router needs Port Forwarding (IP Masquerade)
feature on Page 32 in the Operating Instructions.
[Type 2]
Internet Connection with a
Broadband Router
Modem
Broadband
Router
CATV
xDSL
Optical cable
Internet
WAN
LAN
Network Camera can be installed alone without PC on the
network. When you set up the Network Camera in
[Type 3]
,
please connect the Network Camera temporarily in
[Type 1]
,
[Type 2]
or
[Type 4]
.
[Type 3]
Internet Direct Connection
with a Modem
Most of the xDSL services use PPPoE. Network Camera
does not support PPPoE. If the Internet connection
requires PPPoE, please connect with the router supporting
PPPoE like
[Type 2]
.
Note
Modem
Internet
Network Camera can be installed with the PC directly.
[Type 4] Direct Connection with a PC
Please use Category 5 cross cable when connecting directly
with the cable to the PC.
Note
Category 5 cross cable
AC Adaptor
AC cord
(Type C-7)
Screws and
Washers
(Two sets)
Camera Stand
Main Unit
Setup
CD-ROM
