URAL Motorcycles 4320M, Руководство по эксплуатации, Страница: 307 / 321

272
End of Table H.1
- Air hose 1
- Spare wheel bracket winch handle 1
Fixed under the platform
- Tire lever 1
In the glove box
- Operation Manual 1
On the platform
- Distance pipes 1
In the cab
- Jacketed canopy 1
In special housing in the front platform part
- Canopy bow 1
- Warm-keeping jacket 1
Under the radiator case
- Cab lifting pump lever 1*
3
- Fill funnel with a hose 1*
3
___________________
* Delivered on the order
*
1
For 6x6 wheel arrangement trucks
*
2
A part of spare parts kit for YAMZ-536 power unit, delivered on the order
*
3
For cabover trucks
З.2. Hydraulic telescopic jack
З.2.1. Technical Information
Table 32
Type Hydraulic, telescopic,
with two operated rams
Lifting capacity, kN (tf) 80 (8)
Jack height when the rams are down and the screw
is in, mm
270
Cargo lifting height, mm 285
Oil volume, l 0.6
To lift a cargo by the jack:
- install the jack as needed, screw in the screw 1, as shown in figure K3, as much as nec-
essary, if the ground is soft, put a hard plank or another flat object under the supports to increase
the area bearing;
- push the lever 2 twice quickly when the needle valve 3 is unscrewed;
- screw in the needle valve by the tire iron clockwise against stop;
- raise operated rams as necessary by levering with the tire iron inserted into the lever 2.
If the jack is not working due to valves lock, slightly hit the pressure ram lever with the
tire iron.