Shibaura CA20-M10, Руководство по эксплуатации

Страница: 95 / 384

4
– 11
(1) Explanation of MVM table
The MVM table is used to set the matrix (pallet, etc.) shape, etc.
For the matrix shape as shown above, the parameters are set in the MVM table as shown
below.
Point Coordinate table No. Direction
No. of
matrixes
Applicable
counter No.
P0
1
Point coordinate table
No.(*1)
P1 3 (*2) 1 (*3)
P1 3 Point coordinate table
No.(*1)
P2 2 (*2) 2 (*3)
P2
4
Point coordinate table
No.(*1)
The set of table data as shown above is called one group (GRP).
A total of 32 tables (GRP = No. 1 to 32) can be set.
*1: Explanation of coordinate table No.

The P0, P1 and P2 coordinates set the points of each matrix end.

The coordinates are set indirectly using the coordinate table No. so the actual coordinate
data must be set in the coordinate table.

"0 to 999" can be set for the coordinate table No.

If the matrix only has one row, set P0 and P1 to the normal values, and set P2 to "0".

P0 does not always have to be set to the point closest to the origin. The operation order
can be changed by changing the P0. P1 and P2 coordinate settings.
*2: Explanation of No. of matrixes

Set the No. of matrixes in the P1 direction and in the P2 direction.

"0 to 9999" can be set for the No. of matrixes.

If the matrix only has one row, set P1 to the normal value, and set P2 to "0".
*3: Explanation of applicable counter

The applicable counter is used to control the matrix movement (MVM command).

"0 to 99" can be set for the applicable counter.

If the matrix only has one row, set P1 to the normal value, and set P2 to "0".
One group (GRP)
P2 direction
D side matrix (destination side)
Y axis
S side set point
X axis
P1 direction