Shibaura CA20-M10, Руководство по эксплуатации

Страница: 88 / 384

4
– 4

4.1.3 Copy editing of sequential programs
A series of steps can be copied in a block from one program and entered into another.
Set the program mode and press
HELP
. The following display will appear. (Refer to section
4.1.1.)
STEP 1
When this instruction appears, press
F 3
.
STEP 2 Press
F 4
. Press
ESC
to return to the
initial screen of the program mode.
STEP 3
Press
F 1
. Press
ESC
to return the
display to STEP 2.
[SETP- COPY FROM[01]
COPY][0001]-[0010]
COPY TO
[01]-[0020]
STEP 4 Use the numeric keypad to enter the task No. of
the copy origin program. (Input range: 01 to 04)
STEP 5
Use the numeric keypad to enter the first and
last steps of the copy origin.
STEP 6
Use the numeric keypad to enter the task No. of
the copy designation program. (Input range: 01
to 04)
STEP 7
Next use the numeric keypad to enter the copy
destination step and then press
ENT
.
Copy will be executed, and the program will
return to STEP 3.
Press
ESC
to return the display to STEP 3.
NOTE

When program steps in which tag Nos. are written are copied, the tag No. in the
smaller step No. or the smaller tag No. will be effective after copying.

To prevent a double tag error, change the tag Nos. after copying.