Shibaura CA20-M10, Руководство по эксплуатации

Страница: 74 / 384

3
– 14
[Common screen]
NOTE

Movement of the axes in JOG operation is done by pressing the +1 and -1
keys for the first axis and the
+2
and
-2
keys for the second axis. If the key
is a plus key, the axis will move in the direction opposite the origin while the key is
held down, and if it is a minus key will move in the direction of the origin.

The JOG operation speed can be set with the JOG speed in parameter 1. (Refer to
section 13.3.7.)

Inching movement in JOG operation can be performed by pressing and quickly
releasing the MOVE keys ( +1 -1 +2 -2 ). The distance of an inching
movement can be set by JOG increment of parameter 1. (Refer to section 13.3.8.)
[Coordinate table input screen]
Easy mode coordinate input
screen
Palletizing mode coordinate
input screen
STEP 2
Remote teaching screen is displayed and
JOG operation can be executed in remove
teaching mode.
Toggling of speed operation can be executed
by pressing
ALT
.
LOW (low speed) and HIGH (high speed)
STEP 3
For example, hold down
+1
until the
controller moves to an appropriate point.
Then, release the key to stop the axis and
press
ENT
. The current coordinates will be
entered.