Shibaura CA20-M10, Руководство по эксплуатации

Страница: 41 / 384

2
– 17

2.4.2 Supply power and grounding
The power voltage supplied to the CA20-M10/S10 can be either 100VAC system or 200VAC
system by changing the VOLTAGE SELECT terminal's short bar on the terminal board. The
power voltage supplied to the CA20-M40/S10 can only be 200 VAC system.
CA20-M10/S10
100VAC system: Single-phase 100VAC to 120VAC ±10% 50/60Hz
200VAC system: Single-phase 200VAC to 240VAC ±10% 50/60Hz
CA20-M40/S40 200VAC system: Single-phase 200VAC to 230VAC ±10% 50/60Hz

Power input terminal (AC IN)
When used in Japan, the supply voltage is normally ±10% in respect to the nominal voltage.
However, if the voltage fluctuation is particularly large, connect a constant voltage device
externally.
To change between the 100VAC system and 200VAC system, short circuit the VOLTAGE
SELECT terminal with the enclosed short bar to select 100VAC, and leave the terminal
opened to select the 200VAC system.
Use the CA20-M40/S40 with the 200 VAC system left open.
Power supply cable
(2c × 1.25mm
2
or more)
Grounding wire (2mm
2
or more)
Short bar Open
(a) For 100VAC system (b) For 200VAC system