Shibaura CA20-M10, Руководство по эксплуатации

Страница: 334 / 384

18
– 34
OFS
[Function] This command is used to shift the absolute position for an axis by the amount
of the specified offset value.
[Explanation]

It can be used for move commands (MOVP, MVB, MVE, and MVM).

The OFS command, once executed, remains effective until the next OFS
command is executed.

Enter "OFS X = 0, Y = 0" into the program and execute it to release the
offset.

Note that the current position after the execution of the offset command is
displayed as follows.
= absolute position

executed offset value
(Example)
When offset value is X = 30, Y = 20
Point A absolute coordinates: X = 60, Y = 40

) Executed offset value: X = 30, Y = 20
Current position monitor display: X = 30, Y = 20
[Key operation]
Press
F 1
followed by
IN
1
,
IN
1
(press twice).
NOP changes to OFS.
Press
ENT
.
STEP 2
Enter the coordinate table No. with the numeric
keypad and press
ENT
.
(Input range: 1 to 999)
[ P R G M ]
0 0 0 1
N O P
[ P R G M ]
0 0 0 1
O F S N O = 0 0 1
Offset
Current position
monitor display
Coordinate system after offset
Y
Point A
Absolute position
Y'
Absolute position
Offset origin
40
20
0 30 60 X
X'
30
20
STEP 1