Shibaura CA20-M10, Руководство по эксплуатации, Страница: 372 / 384

20
– 12

Backup specification
Item Specification Remarks
Backup voltage
3.6 V DC
(Standard)
Controller front LED flashes in green when at 3.1
V DC or less (low voltage warning) (Note 1)
Battery error occurs at 2.5 V DC or less during
backup
Consumption
current
When controller is in
non-conducting state 260

A
(Maximum)
25°C
Maximum instantaneous current:
2 mA
When controller is in
conducting state 1

A
(Standard)
Note 1: The LED indicator remains flashing in green even if the backup voltage is recovered
while the power is on. The power is turned on again. In some cases, the status LED
does not blink in green even at a voltage drop due to the impedance.

Encoder-related errors
For details on Encoder-related errors, refer to section 2.4.10.