Shibaura CA20-M10, Руководство по эксплуатации

Страница: 274 / 384

13
– 30

13.5.4 Setting of MVM table
Press
F 4
in the table selection screen shown in section 13.5, and select the MVM table.
STEP 1
Use the numeric keypad to enter the P0, P1
and P2 coordinate table Nos. (1 to 999) and
press
ENT
.
When
NEXT
is pressed, the next screen will
display.
Press
ESC
to return to the table selection
screen.

If a specific MVM table is to be displayed or revised while inputting the MVM table (STEP
1 to 3), press
SEARCH
and then enter the table No. with the numeric keypad (1 to 32).

Refer to section 4.1.7 for program examples using the MVM table.
STEP 2
Use the numeric keypad to enter the No. of
pieces to be moved and loaded and then press
ENT
.
When
-NEXT
is pressed, the previous screen
will display. Press
ESC
to return to the table
selection screen.
STEP 3
Use the numeric keypad to enter the No. of the
counter to be used and press
ENT
. When
-NEXT
is pressed, the previous screen will
display. Press
ESC
to return to the table
selection screen.
[ P A R A ] N U M B E R
M V M - T B L P 1 : 0 0 0 0
0 1 - 2 P 2 : 0 0 0 0
[ P A R A ] C N T N O .
M V M - T B L P 1 : N O = 0 0
0 1 - 3 P 2 : N O = 0 0
[ P A R A ] O R G : N O = 0 0 1
M V M - T B L P 1 : N O = 0 0 0
0 1 - 1 P 2 : N O = 0 0 0