Shibaura CA20-M10, Руководство по эксплуатации

Страница: 278 / 384

14
– 4
NOTE

For the station No. 0 (master unit) only bit Nos. 6 to 8 are valid for the system
input S01 and bit Nos. 1 to 5 for the general-purpose input G01. No. 5 of S01 can
be used only as the input monitor of return to origin.

The return to home input (initial value) is set to No. 5 of G01, but the function can
be moved to a random general-purpose input by designating the bit. (Refer to
section 13.2.6.)
Even if the input is changed with bit designation, the return to home input status
can be monitored with bit No. 5 of S01.

The display for the invalid bits is 0.

When is pressed (output monitor)
STEP 3B
Enter the station No. of the controller to be
monitored and press
ENT
.
STEP 4B
The status of the current system output port and
general-purpose output port will be displayed
with a bit units.
When
NEXT
is pressed, the next screen will
display. Press
ESC
to return to STEP 2.
NOTE

For the station No. 0 (master unit) only bit Nos. 5 to 8 are valid for S01. Only bits
Nos. 1 to 4 are valid for G01.

The display for the invalid bits is 0.
S
T A T I O N N O . [ 0 ]
[ M O N I S Y S 0 1 : 0 0 0 0 0 0 0 0
- O U T ] G E N 0 1 : 0 0 0 0 0 0 0 0
G E N 0 2 : 0 0 0 0 0 0 0 0
G E N 0 3 : 0 0 0 0 0 0 0 0
System
output
Signal name
Bit No. 5 Running
Bit No. 6 Error
Bit No. 7 Positioning complete
Bit No. 8 Return to origin complete
system output
general-purpose
output No.8 No.1
No.8 No.1
Display
“0”: OFF
Display
“1”: ON