RADIOMETER ABL800 FLEX, Руководство оператора

Страница: 171 / 438

ABL800 FLEX Operator's Manual 4. Sample measurements
Patient identification
Unless the Batch mode is used, the Patient Identification screen is displayed
while the sample is being aspirated.
Entering
information
with barcode
reader
To enter information with a barcode reader (the "Enable General Barcode Support"
must be activated in Miscellaneous Setup) in the item boxes, which have barcode
support, do the following:
Step Action
1. Scan the barcode with the barcode reader.
Primarily, Operator, Accession No., Patient ID and Sampler ID are
scanned.
If the operator is scanned from the ID-card, and the operator is not
included in the list of the analyzer's registered users, the barcode will
be read directly from the ID-card.
Entering
information
manually To enter patient information manually, do the following:
Step Action
1. If desired, select another report layout by selecting the "Report layout"
item/box on the screen and choosing the desired layout in the
appearing list
2. Highlight the desired text boxes and use the keyboard to type the
desired data and press
Enter .
•
Sample demographics on the basis of an entered/scanned Sampler
ID, i.e. all information about the sample (measuring mode,
parameters, all input values and patient demographics). Data based
on the Sampler ID is transferred from the RADIANCE system.
•
Patient demographics on the basis of an entered/scanned Accession
No., Patient ID or Department (Pat.)., i.e. all information about
Patient ID, Patient Last Name, Patient First Name, Sex, Date of
birth, Department (Pat.), Patient Note, Birth weight and Gestational
Age. Data based on Accession No., Patient ID or Department (Pat.).
can be transferred from all connections
Mandatory text boxes (with a
"
next to it) must be filled in order to
view the measurement results.
Continued on next page
4-17