Nidek Medical RT-5100 Скачать руководство пользователя страница 54

Страница: 54 / 306

OPERATING PROCEDURE

Entering Data

2.2.6

Entering day and night data from ARK-10000 or OPD Scan III

Night data as well as day data can be entered simultaneously from the ARK-10000 (V2.13 or later) or
OPD-Scan III.

* Day data is measurement data for bright environment and night data is measurement data for dark

envionment.

• When the “Display the Day/Night switching button” parameter is set to “No”, if night data is

input,

is displayed in the function buttons and Night/Day mode can be switched.



When calling up data from the ARK-10000 connected with a cable

When entering day data only, see "2.2.1 From an auto refractometer" (page 30).

For detailed procedure for transferring data from the ARK-10000 to the RT-5100, refer to the ARK-10000 Operator's Manual.

• The “AR port” parameter needs to be set as “WF(OPD)”.

• On the ARK-10000 Settings screen, check “Send HD Exam data”.

• If the ARK-10000 Settings screen has the item “HD Exam support RT”, check it.

• Perform Steps 1 to 3 with the ARK-10000, and Steps 4 and later with the RT-5100.

Measure the patient's eye with the ARK-10000 in ARK/CT mode.

Refer to the ARK-10000 Operator's Manual.

After the measurement, press the print button of the ARK-10000.

The HD EXAM dialog box appears. Press [Send both data].

The measured data is printed and automatically stored in the memory of the RT-5100 relay
box.

The number at the top of the printout is a called data No. The number is necessary to call up
the stored data.

• The maximum data count is 9999. However, only the last 150 measurements are retained.

Whenever the data count exceeds 150 measurements, the prior data up to the start of those 150
measurements are deleted.

Press

The last data No. read from an auto refractome-
ter or a lensmeter appears on the screen.

Set the data No. at the top of the printout.

Change the data No. with the dial.

161221687130 承認済

Uncontrolled copy when printed.

Содержание RT-5100



















































































































































































































































































































Результаты поиска

Содержание RT-5100

Отзывы:

Похожие инструкции для RT-5100

Бренды по названию

Популярные бренды

Nidek Medical RT-5100, Руководство оператора

Результаты поиска

Содержание RT-5100

Отзывы:

Похожие инструкции для RT-5100

Бренды по названию

Популярные бренды