Nidek Medical RT-5100, Руководство оператора

Страница: 50 / 306

32
OPERATING PROCEDURE Entering Data
2.2.2 From a lensmeter
When the RT-5100 interfaces with one of the NIDEK lensmeters, the measured data is automatically
transferred to the RT-5100 by pressing the Print button of the lensmeter. The RT-5100 stores the data
in the memory of the relay box. When the data is already in the memory, skip Steps 1 and 2.
1
Measure the patient’s glasses with the lensmeter.
See the corresponding operator’s manual.
2
After the measurement, press the Print button of the lensmeter.
The measured data is printed and automatically stored in the memory of the RT-5100 relay
box.
The number at the top of the printout is called a data No. The number is necessary to call up
the stored data.
• The maximum data count is 9999. However, only the last 150 measurements are retained.
Whenever the data count exceeds 150 measurements, the prior data up to the start of those 150
measurements are deleted.
3
Press .
The last data No. read from an auto refrac-
tometer or a lensmeter appears on the
screen.
4
Set the data No. at the top of the printout.
Change the data No. with the dial.
5
Enter the data.
Press .
The refractor head is automatically set
depending on the selected data. The subjective refinement starts.
If the “Preset power of Subj 1” parameter is “AR” and the subjective data has already been
entered, even if LM data is later entered, the subjective data remains unchanged.
The elapsed time from data entry start in the subjective data field is displayed when the
“Operating timer” parameter is set to “Subj”. (except when the elapsed time indication has
already started.)
161221687130 承認済
Uncontrolled copy when printed.