Nidek Medical RT-5100, Руководство оператора

Страница: 48 / 306

30
OPERATING PROCEDURE Entering Data
2.2 Entering Data
Enter objective (AR) and/or lensmeter (LM) data.
2.2.1 From an auto refractometer
When the RT-5100 interfaces with one of the NIDEK auto refractometers, the measured data will be
automatically transferred to the RT-5100 by pressing the Print button of the auto refractometer. The
RT-5100 stores the data in the memory of the relay box. When the data is already in the memory, skip
Steps 1 and 2.
• When connecting the RT-5100 to the auto ref/keratometer (ARK), set the “AR port”
parameter to “ARK”. When connecting the RT-5100 to the auto ref/kerato/tonometer (RKT),
set the “AR port” parameter to “RKT”. When connecting the RT-5100 to the ARK-10000
(V2.11 or later) or OPD-Scan III, set the “AR port” or “LM port” (port that the ARK-10000 is
connected) parameter to WF (OPD). When performing patient view simulation with RT data
on the OPD-Scan III (V1.05 or later), set “HDR”.
• When entering day and night data from the ARK-10000 or OPD-Scan III, see "2.2.6
Entering day and night data from ARK-10000 or OPD Scan III" (page 36).
1
Measure the patient’s eye with the auto refractometer.
See the corresponding operator’s manual.
2
After the measurement, press the Print button of the auto refractometer.
The measured data is printed and automatically stored in the memory of the RT-5100 relay
box.
The number at the top of the printout is a called data No. The number is necessary to call up
the stored data.
• The maximum data count is 9999. However, only the last 150 measurements are retained.
Whenever the data count exceeds 150 measurements, the prior data up to the start of those 150
measurements are deleted.
161221687130 承認済
Uncontrolled copy when printed.