manualshive.com logo in svg

Nidek Medical RT-5100, Руководство оператора

Поделиться
Скачать
Nidek Medical RT-5100 Скачать руководство пользователя страница 253

235

21 Point Exams (only for Plus Package)

21 Point Exams Result (only for Plus Package)

5

Heterophoria AC/A

The Heterophoria AC/A value is automatically calculated and displayed when values for “#8 
H.Phoria(F)” and “#13B H.Phoria(N)” are entered. This value is calculated by the formula 
below.

AC / A = PD - d x (Phoria(Far) - Phoria(Near))

PD(cm): pupillary distance

d(m): near point phoria measurement distance

Phoria: Exophoria (-), Esophoria (+)

Sheard (F), Sheard (N)

Prism values and SPH adjustment values that satisfy the Sheard’s criterion.

The RT-5100 automatically calculates and displays the prism value necessary to satisfy the 
criterion necessary for Sheard’s criterion calculation when values for phoria and fusional 
convergence reserve or fusional divergence reserve are entered. In addition, with AC/A, the 
SPH adjustment value is calculated and displayed in parentheses. The SPH adjustment 
value is the value for how much to increase/decrease the value against #7 Subjective value. 
The SPH adjustment value is displayed in pink when the value is negative.

When the criterion is satisfied, 0.00 is displayed. If there is no necessary data so calculation 
is not possible, the field is blank.

The value is calculated by the following formulas.



=  

2P-R 

3 

SPH

=  

    

      

AC / A 

: Necessary prism value for satisfying the criterion

P: Phoria value

R: Fusional convergence reserve or fusional divergence reserve

•Fusional convergence reserve basically uses blur value (Far point: #9, Near point: #16) for 

calculation. If there is no blur value, use the break value (Far point: #10Break, Near point: 
#16Break) to calculate.

•For fusional divergence reserve, break value (#11Break) is used basically for far point to 

calculate. For near point, blur value (#17) is used for calculation. If there is no blur value, use the 
break value (#17Break) for calculation.

SPH: Necessary SPH adjustment value for satisfying the criterion

AC/A: The default setting is calculated with Gradient AC/A. It can be changed to Heterophoria AC/

A with the “AC/A for Sheard/Percival SPH” parameter.

 *Criterion: To maintain the normal binocular vision, values for fusional convergence reserve 

or fusional divergence reserve must be two times or greater than those for phoria.

161221687130 承認済

Uncontrolled copy when printed.

Содержание RT-5100



















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды