manualshive.com logo in svg

Nidek Medical RT-5100, Руководство оператора

Поделиться
Скачать
Nidek Medical RT-5100 Скачать руководство пользователя страница 196

178

TEST METHOD

Binocular Visual Function Test

4.4.9

Maddox test (horizontal phoria)

Use: To detect horizontal phoria
Chart: Fixation
Auxiliary lens: Horizontal maddox rod to the right eye, rotary prism to the left eye
Ideal appearance:

Right eye

Left eye

Binocular vision (Orthophoria)

1 

Present the fixation chart.

Press 

.

The horizontal maddox rod is placed in the right measuring window.

The base in/out prism powers can be entered.

2

Ask the patient, “Is the white spot shifted to the left or right? Or, it is overlaid on the red 
bar?”

When the spot is shifted to the left or right, correct it as follows:

Appearance of 

chart

Phoria

Correction

<1> The white spot 

is at the left of the 

red bar.

Esophoria

Press 

. Turn the dial clockwise to add the BO prism 

power until the spot is overlaid on the bar.

<2> The white spot 

is at the right of the 

red bar.

Exophoria

Press 

. Turn the dial counterclockwise to add the BI 

prism power until the spot is overlaid on the bar.

• The rotary prism lenses are removed from the measuring windows when the already 

selected button is pressed again in prism mode.

ex.When 

 is pressed in the base in/out prism, the rotary prism lenses are removed.

• Use 

 or 

 instead of the dial for fine adjustment.

• When the prism power is added, the prism power can be added in 0.5 D increments by 

adding the prism power for single-eye compared to both eyes.

Dial                  1.0



 0.5

, 

 

        0.2



0.1

161221687130 承認済

Uncontrolled copy when printed.

Содержание RT-5100



















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды