Nidek Medical RT-5100, Руководство оператора

Страница: 107 / 306

• When a measurement is performed based on the day and night data from the ARK-
10000 or OPD-Scan III, "For day" or "For night" is printed on the first line accordingly
for the type of data.
• When Wave Front data is entered, the Wave Front data is printed in the Objective
data area.
• The device uses thermal paper for printer. When saving the printings, make a copy
of it.
The thermal paper may be difficult to read due to the aged deterioration.
89
OPERATING PROCEDURE Printing
2
 Whether the CL data (CL conversion value) is printed or not
The “Print CL data” parameter selects whether the CL conversion value of the subjective data is
printed together with the normal data. See "3.19 Parameter Settings" (page 133).
The contact lens conversion value is the value converted the Subjective value from VD (vertex dis-
tance) 12 mm to 0 mm.
 Whether the trial lens data is printed or not
The “Print TL data” parameter selects whether the trial lens (TL) data for the final prescription is
printed together with the normal data. See "3.19 Parameter Settings" (page 133).
 Whether the data is cleared after printing
The “Clear after print” parameter selects whether the displayed data is cleared automatically after
printing. See "3.19 Parameter Settings" (page 133).
The latest 50 data which is already printed is stored in the memory. See "3.12.1 Calling up measure-
ment data" (page 119).
 KM measurement
To print the keratometry (KM) measurements converted to diopters, it is necessary to set the I/F For-
mat parameter in the ARK to All.
 When printing day/night data
Day data
Night data
When both day data and night data are input, the data are
printed separately as shown to the right.
161221687130 承認済
Uncontrolled copy when printed.