Nidek Medical RT-5100 Скачать руководство пользователя страница 31

Страница: 31 / 306

BEFORE USE

Configuration

7-8.

Goes into the mode that allows base up/down prism power in rectangular coordinates or prism base angle in
polar coordinates to be entered.

8. Eye selection keys

Select the right eye (R), left eye (L), or both eyes (BIN) for subjective refinement.

• The occluder is placed automatically in the non-selected eye side.

However, it is not placed during the binocular vision test with polarizing filters.

•



Selects a dominant eye.

The yellow and bold R or L indication at the top of the screen is displayed to indicate the dominant eye.

8-1.

Opens the right measuring window and places the occluder in the left one. Any value can be entered only for
the right eye.

When the binocular vision test chart is selected, the left eye side is not occluded but the data entry only for the right
eye is also possible.

8-2.

Opens the left measuring window and places the occluder in the right measuring window. Any value can be
entered only for the left eye.

When the binocular vision test chart is selected, the right eye side is not occluded but the data entry only for the left
eye is also possible.

8-3.

Opens both measuring windows.

The data entry for both eyes are available.

Displays the main menu screen.

10.

Clears all displayed data. In addition, pressing a data key such as

with this key deletes the

corresponding field data.
When the “Clear confirmation” parameter is set to “Yes”, the confirmation window is displayed before data is

cleared. It prevents data from being deleted by touching

accidentally.

11. Mask keys

Isolate any horizontal or vertical line or single letter on the chart.
Press any of the chart keys to cancel the mask functions.
The visual acuity of the isolated horizontal line or letter is shown in the VA field on the screen.

161221687130 承認済

Uncontrolled copy when printed.

Содержание RT-5100



















































































































































































































































































































Результаты поиска

Содержание RT-5100

Отзывы:

Похожие инструкции для RT-5100

Бренды по названию

Популярные бренды

Nidek Medical RT-5100, Руководство оператора

Результаты поиска

Содержание RT-5100

Отзывы:

Похожие инструкции для RT-5100

Бренды по названию

Популярные бренды