Nidek Medical RT-5100 Скачать руководство пользователя страница 139

Страница: 139 / 306

121

ADVANCED FEATURES

Programming

3.14 Programming

The RT-5100 has six programs of A, B, C, D, E, and

The standard program has already been written in Programs A, B, and

.as factory setting. Pro-

grams C, D, and E are empty. All programs (A, B, C, D, E, and

) are programmable.

See "2.5.1 Program A" (page 43) for the contents of Program A.
See "8.8 Standard Programs" (page 272) for the contents of Program B.
See "2.5.2 Program Day/Night" (page 53) for the contents of Program

For the Plus Package, though Program #7 is added in addition to the program A to E and

, delete,

write, and operation can be performed as with the other programs.

3.14.1 Clearing programs

The contents of each Program A, B, C, D, E,

, or #7 are cleared. It is performed when each pro-

gram is reprogrammed.
To clear Program A, B,

, or #7, set the Program A, Program B, Program

, or Program #7

parameter to User beforehand (see page 140). (#7 is only for Plus Package)

Display the Programming screen.

1) Call up the main menu screen.

Press

161221687130 承認済

Uncontrolled copy when printed.

Содержание RT-5100



















































































































































































































































































































Результаты поиска

Содержание RT-5100

Отзывы:

Бренды по названию

Популярные бренды

Nidek Medical RT-5100, Руководство оператора

Результаты поиска

Содержание RT-5100

Отзывы:

Бренды по названию

Популярные бренды