Nidek Medical RT-5100 Скачать руководство пользователя страница 157

Страница: 157 / 306

139

ADVANCED FEATURES

Parameter Settings

Print format (for Plus Package, Print format 1): All data, w/o AR, Unaided, Subj, Final

Factory setting: All data
Setting for the contents to be printed.

All



All data

w/o AR



All data except AR data

U.S.F.



Unaided visual acuity, subjective refinement data, and final data

When the Printer parameter is set to Canon or HP:

Standard



Data printed in the standard format

Short



Data printed in the short format

Print format 2 (for Plus Package): 21 Point Exams, Standard

Factory setting: 21 Point Exams
Setting for the contents to be printed.
21 Point Exams



Print the data for each examination of 21 Point Exams.

Standard



Print the measurement result in a standard print format.

Date format for print: mm/dd/yyyy, dd/mm/yyyy, yyyy/mm/dd

Factory setting: mm/dd/yyyy
Setting for the data format to be printed.

mm/dd/yyyy



AUG/20/2005

dd/mm/yyyy



20/ 8/2005

yyyy/mm/dd



2005. 8.20

QR code: QR1, QR2, Off

Factory setting: Off
Selection of whether or not to print QR code and of data to be printed with QR code.

QR1



The final data (subjective or prescription data) and the QR code are printed.

QR2



All data is printed along with the final data QR code.

Print list: Yes, No

Factory setting: Yes

When the setting is Yes, the data list is displayed automatically when

is pressed.

Confirm that all necessary tests have been performed and press

again to print the data.

When any test is omitted, press [End] on the screen and return to the measurement screen.

Operating timer: Prog., Subj, NO

Factory setting: Subj.
Selection of whether or not to display and print the elapsed time from data entry start in the subjective

field. When the setting is Subj, it is displayed instead of the time in the upper-right of the screen. When

the setting is Prog., the elapsed time from data entry start is displayed.
In addition, the elapsed time is displayed as test time on the Recall Data screen.

161221687130 承認済

Uncontrolled copy when printed.

Содержание RT-5100



















































































































































































































































































































Результаты поиска

Содержание RT-5100

Отзывы:

Похожие инструкции для RT-5100

Бренды по названию

Популярные бренды

Nidek Medical RT-5100, Руководство оператора

Результаты поиска

Содержание RT-5100

Отзывы:

Похожие инструкции для RT-5100

Бренды по названию

Популярные бренды