Nidek Medical RT-5100 Скачать руководство пользователя страница 169

Страница: 169 / 306

151

TEST METHOD

4.1

Visual Acuity Test

4.1.1

Unaided Visual Acuity Test

Press

The unaided visual acuity (VA) test starts.

Press

The left measuring window is occluded.

According to the entered AR data, the esti-
mated VA chart is presented automati-
cally.

*24

See "8.6 Estimated Visual Acuity

Table" (page 270).

Obtain the unaided VA for the right eye.

Obtain the best possible VA.

Change the chart with

The VA of the last presented chart is in the
VA field.

Press

The left measuring window is opened and the right one is occluded.

According to the entered AR data, the estimated VA chart is presented automatically.

Obtain the unaided VA for the left eye.

Follow the same procedure as Step 3.

Press

Both measuring windows are opened.

Obtain the binocular unaided VA.

Follow the same procedure as Step 3. The higher VA chart between both eyes is presented
automatically.

The unaided VA test is completed.

*24.

The estimated VA chart is not presented when the “Preset VA” parameter is set to “No” or the data has already been en-
tered in the final field.

161221687130 承認済

Uncontrolled copy when printed.

Содержание RT-5100



















































































































































































































































































































Результаты поиска

Содержание RT-5100

Отзывы:

Бренды по названию

Популярные бренды

Nidek Medical RT-5100, Руководство оператора

Результаты поиска

Содержание RT-5100

Отзывы:

Бренды по названию

Популярные бренды