manualshive.com logo in svg

Nidek Medical RT-5100, Руководство оператора

Поделиться
Скачать
Nidek Medical RT-5100 Скачать руководство пользователя страница 131

113

ADVANCED FEATURES

Setting Auxiliary Lenses

3

3.7

Setting Auxiliary Lenses

Auxiliary lenses are automatically placed according to a selected chart. However, other lenses can 
also be set as follows:
* The lens power for retinoscope (+1.5/+2.0) can be switched and set the fog amount for both eyes 

open.

1 

Open the Auxiliary Lenses window.

Auxiliary lens display

Press the auxiliary lens display at the top 
of the measurement screen.

2

Select the desired auxiliary lens with the 
corresponding button.

The selected auxiliary lenses are placed in 
the refractor head and the screen returns 
to the main measurement screen.

[

]: Open aperture

[

]: Occluder

[

]: Polarizing filters (Right eye: 45°, Left eye: 135°)

[

]: Polarizing filters (Right eye: 135°, Left eye: 45°)

[

]: Right eye: Fixed cross cylinder lens, Left eye: Occluder

[

]: Right eye: Occluder, Left eye: Fixed cross cylinder lens

[

]: Right eye: Red filter, Left eye: Green filter

[RETI 1.5]: Spherical lenses for retinoscope

The lens power is selectable with [1.5] and [2.0].

[1.5]/[2.0]: Selects the spherical lens power for retinoscope b1.5D and +2.0D.

[Fog 1.75]: Fogging

                  The fogging amount can be specified with the following [ + ] and [ - ].

[+]/[–]: Increases or decreases the fog amount.

161221687130 承認済

Uncontrolled copy when printed.

Содержание RT-5100



















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды