Nidek Medical RT-5100 Скачать руководство пользователя страница 143

Страница: 143 / 306

• The cross cylinder setting cannot be selected between Flipped and Auto. Set the lens type

with the “Cross cylinder (XC) test” parameter (see page 134).

• The fog function can be added with both eyes open. Set the fog according to "3.8 Fog

Function with Both Eyes Open" (page 115). The setting is programmed the same as other
auxiliary lenses.

• When the “Intelligent XC” parameter is set to “Yes” (default), the cross cylinder test may not

be performed depending on the cylinder values (cylindrical power).

125

ADVANCED FEATURES

Programming



For Plus Package, exam can be specified with the 21 Point Exams.

1) Press [Chart] to display the 21 Point

Exam button.

2) Select the exam to be stored with the

21 Point Exam button.

21 Point Exams button

[#7 Subj (F)] cannot be selected.

The contents of exam set (chart, auxiliary
lens etc.) are written.

When the steps on the screen are pro-
grammed, go to the next page.

Press [



Next].

When all steps are programmed, press
[

To clear the steps from the next to last for
overwriting, press [LastTest].

Repeat Steps 4 to 6 until the desired charts are programmed in the order desired to be
measured.

It is possible to store up to 32 steps.

Exit from programming mode.

Press [

] until the screen returns to the normal measurement screen.

161221687130 承認済

Uncontrolled copy when printed.

Содержание RT-5100



















































































































































































































































































































Результаты поиска

Содержание RT-5100

Отзывы:

Бренды по названию

Популярные бренды

Nidek Medical RT-5100, Руководство оператора

Результаты поиска

Содержание RT-5100

Отзывы:

Бренды по названию

Популярные бренды