manualshive.com logo in svg

Nidek Medical RT-5100, Руководство оператора

Поделиться
Скачать
Nidek Medical RT-5100 Скачать руководство пользователя страница 3

Before using this product, be sure to read “SOFTWARE LICENSE AGREEMENT” at the 
end of this manual.

The “SOFTWARE LICENSE AGREEMENT” contains the terms for use of the software and 
related materials included for this product.

I

Use this device properly and safely.

BEFORE USE, READ THIS MANUAL.

This operator’s manual includes operating procedures, safety precautions, and 
specifications for the NIDEK REFRACTOR RT-5100 when it is used in combination with 
any of the NIDEK chart presenting devices. The dioptric powers are indicated with a 
reference wavelength of 546.07 nm.

Cautions for safety and operating procedures must be thoroughly understood before 
using this device.

Keep this manual handy for verification.

If you encounter any problems or have questions about the device, please contact NIDEK 
or your authorized distributor.

*To use the functions described in this manual “only for Plus Package,” the optional 21 

Point Exams Plus Package must be installed on the RT-5100.

*For simplicity, examples of chart type used in this manual are from CP-770M only. Any 

other type may be used unless specified otherwise.

*This manual indicates the visual acuity by fractions (feet). Refer to “8.3 VA Conversion 

Table” (Page 267) for visual acuity represented by decimals (meters).

CAUTION! The United States Federal Law restricts this device to sale by or on the order 
of a licensed eye care practitioner.

34085-P902-P2

161221687130 承認済

Uncontrolled copy when printed.

Содержание RT-5100



















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды