Mitsubishi Electric fr-e700 series, Инструкция по эксплуатации

Страница: 439 / 608

Parameter Communication operation and setting
FR-E700 SC EC/ENE 6 - 285
Ethernet function selection (Pr. 833 to Pr. 835)
Refer to the Instruction Manual of the device connected via Ethernet, and set Pr. 833 to Pr. 835 Ether-
net function selection1 to 3 according to the application and protocol.
A communication socket is provided only for the selected application.
햲
If both application and protocol settings are identical in Pr.833 to Pr.835, the priority of the set-
ting is defined as follows: Pr. 833 > Pr. 834 > Pr. 835.
(Example) When Pr. 833 = "31", Pr. 834 = "36", Pr. 835 = "20", "20" and "31" are valid.
햳
To establish the Ethernet communication between the inverter and FR Configurator2, set "20" and
"31" in any two of Pr. 833 to Pr. 835.
Communication speed and full-duplex/half-duplex selection (Pr.832)
Set the communication speed and the communication mode (full-duplex/half-duplex) in Pr. 832 Link
speed and duplex mode selection. If the operation is not performed properly in the initial setting
(Pr. 832 = "0"), set Pr. 832 according to the specifications of the connected hub.
Pr.833 to Pr.835 setting
Port
number
Application
햲
Protocol
햲
Number of con-
nectable clients Refer to
page
0 502 MODBUS®/TCP TCP/IP 3 6-333
10 61450 CC-Link IE Field Network Basic UDP/IP No limit 6-349
20 (Pr. 834 initial value)
햳
45237 iQSS (supported by FR Configurator2) UDP/IP No limit —
30 5000
MELSOFT / FA product connection
UDP/IP No limit
6-291
31 (Pr. 833 initial value)
햳
5001 UDP/IP No limit
36 5006 UDP/IP No limit
38 5008 UDP/IP No limit
9999 (Pr. 835 initial value) Unselected —
Tab. 6-108: Settings for the Ethernet function selection
Pr. 832
Communication
speed Full-duplex/
halfduplex system
Remarks
0 (initial value) Automatic negotiation Automatic negotiation
The communication speed and the communication
mode (half-duplex/full-duplex) are automatically
negotiated to ensure the optimum setting.
1 100 Mbps Full-duplex —
2 100 Mbps Half-duplex —
3 10 Mbps Full-duplex —
4 10 Mbps Half-duplex —
Tab. 6-109: Setting of Pr. 832