Mitsubishi Electric fr-e700 series, Инструкция по эксплуатации

Страница: 412 / 608

Communication operation and setting Parameter
6 - 258
No. Item
Read/
write Instruction
Code
Data Description
Number
of Data
Digits
(Format)
9
Parameters
Read H00 to H63
Refer to the instruction code of the parameter
list (appendix) and write and/or read parame-
ter values as required.
When setting Pr. 100 and later, link parameter
extended setting must be set.
Data format of Pr. 37 read and write is E2 and
A2.
4
(B, E/D)
6
(B, E2/D)
10 Write H80 to HE3
4
(A, C/D)
6
(A2, C/D)
11
Link parameter extended
setting
Read H7F
Parameter description is changed according to
the H00 to H09 setting.
For details of the settings, refer to the instruc-
tion code of the parameter list (appendix).
2
(B, E1/D)
Write HFF
2
(A1, C/D)
12
Second parameter
changing
(instruction code
HFF = 1, 9)
Read H6C
Setting calibration parameter
햲
H00: Frequency
햳
H01: Parameter-set analog value
H02: Analog value input from terminal
햲
Refer to the list of calibration parameters
on page 6-259.
햳
The gain frequency can also be written
using Pr. 125 (instruction code: H99) or
Pr. 126 (instruction code: H9A).
2
(B, E1/D)
Write HEC
2
(A1, C/D)
13 Multi command
Write/
Read
HF0
Available for writing 2 commands, and moni-
toring 2 items for reading data 10
(A3, C1/D)
14
In
ver
ter t
ype monit
or
Inverter type Read H7C
Reading inverter type in ASCII code. "H20"
(blank code) is set for blank area
Example of FR-E740SC
H46, H52, H2D, H45, H37, H34, H30, H20...H20
20
(B, E3/D)
Capacity Write H7D
Reading inverter capacity in ASCII code.
Data is read in increments of 0.1 kW, and
rounds down to 0.01 kW increments.
"H20" (blank code) is set for blank area.
Examples:
0.4K . . . . . "-----4"
(H20, H20, H20, H20, H20,
H34)
0.75K . . . . "-----7" (H20, H20, H20, H20, H20,
H37)
6
(B, E2/D)
Tab. 6-78: Setting of the instruction codes and data (3)
NOTES Refer to page 6-247 for data formats A, A1, A2, A3, B, C, C1, D, E, E1, E2, E3 and F.
Set 65520 (HFFF0) as a parameter value "8888" and 65535 (HFFFF) as "9999".
For the instruction codes HFF, HEC and HF3, their values are held once written but cleared to zero
when an inverter reset or all clear is performed.