background image

E70 Series Instruction Manual

1.10 Screen Saver (Backlight OFF) Function

I - 27

1.10 Screen Saver (Backlight OFF) Function

The screen saver function protects the display unit by backlight OFF after the time set in the parameters has elapsed.
The backlight can also be turned OFF with key operations on the Monitor screen.
The backlight is turned ON by pressing any key.

1.10.1 Backlight OFF

The screen saver function has two types: "Automatic change function" that the backlight is turned OFF after a certain 
period of time, and "Manual change function" that the backlight is turned OFF by key operations.

If there is no key input, no screen display request signal input from the machine within the time set in the parameter 
"#8078 Screen Saver Time", the backlight will be turned OFF.
If "#8078 Screen Saver Time" is set to "0", the backlight will not be turned OFF.

The backlight can be turned OFF by pressing the [SHIFT] and [C.B CAN] keys on the Monitor screen (when a pop-up 
screen is not displayed). 
Even if "#8078 Screen Saver Time" is set to "0", the backlight can be turned OFF by pressing the [SHIFT] and [C.B CAN] 
keys.
(Note 1) Even if the [SHIFT] and [C.B CAN] keys are pressed when a screen other than the main menu is displayed on 

the Monitor screen (when a pop-up window is displayed), the backlight cannot be turned OFF.

(Note 2) The backlight cannot be turned OFF by the manual change function on screen other than Monitor screen.

Automatic change function

Manual change function

Содержание E70 Series















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы: