Mitsubishi Electric E70 Series, Инструкция по эксплуатации

Страница: 266 / 782

E70 Series Instruction Manual
4.3 Program Check (2D)
I - 241
4.3.1 Checking Continuously
Operation method
(1) Press the main menu [Check] . The program check screen becomes active.
(2) Press the [Check search] key.
The following menu appears.
The list appears in a pop-up window.
(3) Select a device.(Ex.) Menu [Memory]
The selected device name and directory (memory: /program)
appear in the device name and directory display columns.
(4)
Use the [ ↑ ], [ ↓ ], [ ↑ ] or [ ↓ ] key to align the
cursor with the target machining program.
The name of the machining program to be edited can
be input in the input area.
(Note) When the number of characters of directory path (full path) exceeds 48, changing directories cannot be performed.
(5) Press the [INPUT] key.
The check search is started. The operation message "Search
complete" appears when the search is completed.After
performing the search, the device and program position appear
in the current machining program display column.The list is
then closed.The system distinguishes between the presence
or lack of an extension, and therefore due care should be
taken.
When setting data exists in the input area, a search
is performed in this data. This procedure is also used
when performing an NB search.
(Ex.)
1001/1/2 O1001 N1 B2
1001.PRG/1/2 O1001.PRG N1 B2
/1/2 (current O number) N1 B2
1001//2 O1001 N0 B2
1001/1 O1001 N1 B0
1001 O1001 N0 B0
/1 (current O number) N1 B0
//2 (current O number) N0 B2
Memory
Memory
card
Close
Top
jump
Bottom
jump