Mitsubishi Electric E70 Series, Инструкция по эксплуатации, Страница: 380 / 782

E70 Series Instruction Manual
6.2 Input/Output Screen
I - 355
6.2.3 Transferring a File
Operating method
(1)
Press the menu [Area change] , and select file
setting column A.
(2)
Designate the transfer origin device, directory and
file name.
The designated file appears.Multiple files can be designated in
the file setting column A. Designate the first and last file name
of the target range. A wildcard "*" can be designated for the file
name.
(3)
Press the menu [Area change] , and select file
setting column B.
(4)
Designate the transfer destination device, directory
and file name.
The designated file appears.
(5) Press the menu [Trnsfr A ->B]. A message appears to confirm the transfer.
(6) Press [Y] or [INPUT]. The file transfer starts. The data being transferred appears in
the input data display column.A message appears when the
transfer is completed.
CAUTION
" ; ", "EOB", "%", and "EOR" are symbols used for explanation. The actual codes for ISO are "CR, LF"
("LF") and "%".The programs created on the Edit screen are stored in the NC memory in a "CR, LF" format,
however, the programs created with external devices such as the FD or RS-232C may be stored in an "LF"
format.The actual codes for EIA are "EOB (End of Block)" and "EOR (End of Record)".
To prevent the influence of data loss and data transformation over the line, always carry out data
comparison after transferring a machining program.
INP data :
CMP data :
G91 G28 XYZ;
F1000;