Mitsubishi Electric E70 Series, Инструкция по эксплуатации

Страница: 260 / 782

E70 Series Instruction Manual
4.2 Program Editing
I - 235
(5)
Input the data such as the G codes in the area for
playback editing. The alphanumeric characters, [
←
],[
→
]and[DELETE] keys
can be input in the area for playback editing.
(Note 1) If the [C/B] key is pressed, all the data in the playback
editing area will be deleted.
(Note 2) When the [
↑
] and [
↓
] keys are pressed, the
program cursor in the right area will move.
(Note 3) When the page-switching key is pressed, the program
in the right area will scroll.
(Note 4) When the menu key is pressed, the process
corresponding to the right area will run. When the cursor
appears on input area of the right area by pressing [Line jump],
[Line copy], [Line clear], [String search], [String replace], [MDI
registration] or [N auto add], the key input is made to the input
area of the right area. When window is displayed by pressing
[Open], [Open(New)] or [Erase file], the key input is made to
the currently displayed window.
(Note 5) The program cursor in the right area cannot move left
and right, but can move only up and down.
(6) Press the axis address key such as [X] or [Y].
The playback movement amount is input after the axis address
in the playback editing area. If the axis address key is pressed
while the playback movement amount is being changed, the
playback movement amount at the time the key was pressed
will be input.
(Note) When inputting a comment, etc., the characters that are
the same as the axis address will all be handled as the axis
address.
(7) Press the [INPUT] key.
The program in the playback editing area will be inserted at the
block before the cursor position in the right area, and the
program is saved.
When there is no "EOB" (;) at the end of the character string, it
is added automatically.
The cursor moves to the line head being cleared the content of
the playback edit.
For an absolute value, the playback movement amount will not
change.For an incremental value, the difference of the axis
command value for the axis used in step (6) and the playback
movement amount will remain as the playback movement
amount.
(Note) If the program is not displayed on right area, the
operation message "Can't execute playback edit" appears.