Mitsubishi Electric E70 Series, Инструкция по эксплуатации

Страница: 290 / 782

E70 Series Instruction Manual
4.4 Program Input/Output
I - 265
4.4.2 Selecting a Device, Directory, and File
This section explains the file device, directory, and file name specification methods for the file transfer and erase
commands etc. performed on this screen.
(1) The device can be selected using the sub-menu or shortcut keys.
(The devices that can be used will differ depending on the specifications.)
(2) One of the following methods can be used to designate the directory (for devices other than the NC memory) and
file name.
・ Designate the directory path or file name in the input area and press the [INPUT] key.
・
Move the cursor in the list display section to the target directory or file name and press the [INPUT] key.A
wildcard (*) can be used for the file name.
(Note) When the number of characters of directory path (full path) exceeds 128, changing directories cannot be
performed.
(1) During directory and file name setting, the designated directory, path or file name will be set, even if it does not
actually exist. This will not cause an error. Note that the previously set directory is overwritten.
(2) When selecting a fixed cycle program, it is necessary to set the basic common parameter "#1166 fixpro".
Furthermore, select "Memory" for the device, and "Program" for the directory.
File operation procedure
Outline of device, directory, and file name designating methods
Device Designation target file
Designation method
Device Directory File name
NC memory
- Machining program
- User macro program
- Fixed cycle program
Select from the
submenu
-
(Default)
Key input in the input area,
and then [INPUT]
Designate using the
shortcut key.
Select from the list
Device other
than the NC
memory
All files
Select from the
submenu Key input in the input area,
then [INPUT] Key input in the input area,
and then [INPUT]
Designate using the
shortcut key.
Select from the list Select from the list
Notes when selecting a file
Select device where the file
subject to the operation exists.
Specify the directory
Specify the file.
a
Select using the shortcut keys or sub -menu.
Select a path from the list, or input using the
keys.
Select a file from the list, or input using the
keys.