Mitsubishi Electric E70 Series, Инструкция по эксплуатации

Страница: 115 / 782

2 Monitor Screens
MITSUBISHI CNC
I - 90
The manual numerical value command mode is canceled by carrying out one of the following operations before pressing
the [INPUT] key.
- Press the menu [Close]
- Press the key
- Change the screen
For each S, M, T and G command, the data type to output to PLC program is designated by parameters "#12006 Mbin M
binary", "#12008 Sbin S binary", "#12010 Tbin T binary" and "#12012 Bbin B binary".
The output data type and the manual numerical value command setting/output range are shown below.
(Note 1) Even if the parameter (#12008 Sbin S binary) is set to "0" (BCD), the signed binary output is applied to S. BCD
output is not applied.
(Note 2) If a negative value is set when the data type is "BCD type" or "No-signed binary type", a value converted into
positive value is output to PLC program.
(Note 3) Add a "-" sign before the value to set a negative value. The display will be a positive value.
(Note 4) A value larger than "#3001 slimt1" to "#3004 slimt4" or "#3005 smax1" to "#3008 smax4" cannot be output for
S.
Operation method (Executing T31 with a manual numerical value command)
(1) Press the main menu [MST]. The S, M, T, B display opens as a pop-up window.
Using the [ ↑ ] and [ ↓ ] keys, move the cursor to
the position to be set.
The cursor moves.
(2)
The manual numerical value command can also be
issued by using the address keys instead of the
operation above.
(Example) [T] The S, M, T, B display opens as a pop-up window.
The cursor appears at T.
(3)
Input a value.
31 [INPUT]
The input value is set.
Operation method (Canceling the manual numerical value command)
Setting/output range of manual numerical value command
BCD No-signed binary Signed binary
Output
range
S -
0 to 99999999 -99999999 to 99999999
M
0 to 99999999 T
B
S 100
M 50
T 4
B 1000
S 100
M 50
T 4
B 1000