manualshive.com logo in svg

Mitsubishi Electric E70 Series, Инструкция по эксплуатации, Страница: 327 / 782

Поделиться
Скачать
Mitsubishi Electric E70 Series Скачать руководство пользователя страница 327

5 Diagnosis Screens

MITSUBISHI CNC

I - 302

(Note)

The data only for the PLC axis indexing function. "-" is displayed in the usual axis (NC axis or during PLC axis 
control) not used by the PLC axis indexing function. 

AFLT gain  (dB)

This displays the present filter depth of the adaptive filter.

LED display

This displays the 7-segment LED of the driver.

Alarm

This displays the alarms and warnings other than the LED display (displayed on drive unit 
side).

Cycle counter  (p)

This displays the position within one rotation of the encoder detector. The position is 
displayed as a grid point value as "0", within one rotation in the range of "0" to "RNG 
(movement units) × 1000".

Grid space

This displays the grid space for the reference position return. (Command unit)

Grid amnt

This displays the distance from the dog-off point to the grid point when the dog-type 
reference position return is displayed. The grid mask amount is not included. (Command 
unit)

Machine posn

This displays the NC basic machine coordinate system position. (Command unit)

Motor end FB

This displays the feedback value of the speed detector. (Command unit)

Machine end FB

This displays the feedback position of the machine end position detector. (Command unit)

FB error  (i)

This displays the error of the motor end FB and machine end FB.

DFB compen amnt  (i)

This displays the compensation pulse amount during dual feedback control.

Remain command

The remaining movement distance of one block is displayed. (Command unit)

Currnt posn  (2)

The value of the tool compensation amount subtracted from the current position is 
displayed. (Command unit)

Man int amt

The amount of interrupt movement in the manual absolute OFF state is displayed. 
(Command unit)

Abs pos command

This displays the coordinates of absolute position excluding the machine error 
compensation amount. (Command unit) 

AUX current sta No.  (Note)

This displays the current station No.

AUX current posn  (Note)

This displays the current coordinates position.

AUX inst station No.  (Note)

This displays the command station No. of automatic operation or the nearest station No. to 
stop by manual operation etc. 

AUX inst posn  (Note)

This displays the coordinates position corresponding to target station No.

Mach err comp val

This displays the machine error compensation amount. (Command unit) 

Display item

Details

Содержание E70 Series















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов