Mitsubishi Electric E70 Series, Инструкция по эксплуатации

Страница: 345 / 782

5 Diagnosis Screens
MITSUBISHI CNC
I - 320
Display items
Display item Details
(1) State
This displays the current sampling status.(The displays, "Sampling" and "Trigger wait" are
highlighted.)
Sampling : Sampling is being executed.
Sampling stop : Sampling is not being executed, or the sampling process has completed.
Trigger wait : When the "Start condition" is not set to "0" (manual start), this indicates a state
waiting for the sampling to start, detecting the trigger, after the menu [Samp start] is
pressed.
(2) Maximum data
This displays the maximum number of data possible for sampling.Normally, the number of
data calculated from the setting value of "Upper limit" is displayed.The maximum number
is 50% of the DRAM available memory.
(3) Sampling counter
This displays the position of the sampling buffer during the sampling process.When the ring
buffer is valid, the head of the buffer can be seen with the value of the counter at the end
of sampling.
(4) Sampling parameter This displays and sets the parameters necessary for sampling.
Menus
Menu Details Type Reference
This starts sampling. This menu cannot be selected under the "Sampling"
state. When the trigger is set (the "Start condition" is not set to "0"), the
state will be "Trigger wait" until the trigger is detected. The sampling will not
stop even if transferred to another screen during sampling.If this menu is
pressed when the parameter "#1224 aux08/bit0" is set to "0", the operation
message "Can't start sampling" is displayed, and the operation will not
start.
C
This stops sampling, and the state will be "sampling stop".The menu
[Samp start] can be selected.
C
Sampling buffer
0
1
:
n- 1 End of buffer (newest data)
Sampling counter (n) n Head of buffer (oldest data)
:
Samp
start
Samp
end