Mitsubishi Electric E70 Series, Инструкция по эксплуатации

Страница: 284 / 782

E70 Series Instruction Manual
4.3 Program Check (2D)
I - 259
4.3.15 Notes for Program Check (2D)
(1) The check function draws while referring only to the NC internal operation results. Thus, the path is not drawn for
commands requiring machine movement.
(2) Check search and check start are not possible during automatic start or automatic pause. The operation message
"Executing automatic operation" appears.
(3) Operation search is possible for a program with 32 or less file name characters.
(4) Graphic check is not available for MDI program.
(1) When the menu [Zoom in] , [Zoom out] , [Display mode] , [Rotate] or [Display range] key is pressed while
checking, the graphic data is erased, however, the program check is not interrupted.
(2) Drawing is continued even after changing to another screen while checking.
(3) Refer to "4.3.13 Handling of Variable Commands, Programmable Parameter Input, and Programmable
Compensation Data Input" for further details on all types of data set in the program while checking.
(4) Checking the program stops if there is a M00/M01 command. However, when executing the M01 command,
drawing is stopped regardless of the ON/OFF status of the optional stop switch signal.
(5) Automatic operation cannot be performed even if the automatic operation button is pressed while checking. "M01
Program check mode 0112" occurs. Execute automatic start after the check is completed or after the check is
interrupted by pressing the [Check reset].
(6) The contents of ONB display and buffer display in the check screen during automatic operation are the contents of
the program during automatic operation. The contents of ONB display and buffer display in the operation screen
during check execution are the contents of the program during check execution.
(7) When operation search or check operation ("Check continu" or "Check step") is performed during program
restarting, the operation message "in program restarting" is displayed, and the program will not be searched or
graphically checked.
(8) If it is switched to manual operation mode during checking, the error "M01 Program check mode 0112" will occur
and axis cannot be moved. To move it, cancel the checking using reset ([Check reset] menu or NC reset). An alarm
will be cancelled after switching to memory mode from manual operation mode. Checking can be continued with the
alarm.
(9) If origin set operation is executed during check, workpiece coordinate counter becomes an origin set value.
However, the coordinate system will return to the value before check after the completion of checking or reset
([Check reset] menu or NC reset) is pressed.
(1) If an M02/M30 command is found, "Program check completed" occurs.
(2) By performing commands such as a check reset or turning the trace display ON, the check mode is exited. Clear
the errors with these operations in the case of a program error.
(1) The checking mode is released when the trace mode becomes ON. It is also released series if NC reset is
executed.
(2) Graphic check (2D) cannot be performed during the trace mode.
(3) When trace window is displayed during check, check will be terminated.
Check function
Notes for checking (Common for continuous check and check step)
Notes for ending check
Notes for switching between trace mode and check mode