Mitsubishi Electric E70 Series, Инструкция по эксплуатации, Страница: 394 / 782

E70 Series Instruction Manual
6.2 Input/Output Screen
I - 369
(2) L type
(a) Tool life management I
Tool life management I format is as follows.
[Output example]
%
LIFEL1( TOOL LIFE DATA)
$1
N1 P12.34.56 E45.56 Q6 F7 S1 B0
N2 P2.3.4 E5.6 Q7 F8 S1 B1
N3 P99.59.59 E99.59 Q9999 F9999 S2 B99
N4 P0.0.0 E0.0 Q0 F0 S0 B0
:
N80 P0.0.0 E0.0 Q0 F0 S0 B0
%
(b) Tool life management II
Tool life management II format is as follows.
Address Definition Details
N Tool No. The tool No. is shown with the value following N.
P Time-used The time-used is shown with the value following P.
E Time-max The time-max is shown with the value following E.
Q Count-used The count-used is shown with the value following Q.
F Count-max The count-max is shown with the value following F.
S Status The status of tool life management is shown with the value following S.
B AUX. The auxiliary data is shown with the value following B.
Address Definition Details
G Group No. The group No. for tool life management is shown with the value following G.
M Method
The tool life management method is shown with the value following M.
0: Life management is carried out using the time of cutting feed execution.
1: Life management is carried out using the number of usages.Counting the number of
usages is executed when changing from rapid traverse command (G00, etc.) to cutting
feed command (G01,G02,G03, etc.). Note that if rapid traverse command or cutting feed
command that does not involve any movement is executed, usage will not be counted.
E/F Service life
The life data (service lifetime) is shown with the value following E.The life data (service
life count) is shown with the value following F.
(Note 1) When the combination of the setting of tool life management method and
address is illegal, error occurs at data input.
(Note 2) The USED data will be incremented when the LIFE data is "0", but no judgment
if the service life is reached will be made.