Mitsubishi Electric E70 Series Скачать руководство пользователя страница 480 | Manualshive

Страница: 480 / 782

Mitsubishi Electric E70 Series Скачать руководство пользователя страница 480

E70 Series Instruction Manual

6.18 All Axis Machine Lock

II - 43

6.18 All Axis Machine Lock

(1) When the "ALL AXES MACHINE LOCK" switch is turned ON, the NC commands for the manual operation or

automatic operation movement can be executed without moving the machine.
The current position display on the setting and display unit will be counted.

(2) The feedrate in the machine lock status is the command speed.
(3) If the "ALL AXES MACHINE LOCK" switch is changed during automatic operation, the automatic operation will stop

after the block currently being executed is completed, and then the setting will be validated.

(4) During reference position return (G28, G30), the movement will be controlled with the machine lock status up to the

middle point. The machine lock status will be ignored from the middle point to the reference position.

(5) If the "MACHINE LOCK" switch is changed during manual operation, the setting will be validated after the feed is

stopped once.

(6) The M, S, T and B commands are executed according to the program.
(7) When the "MACHINE LOCK" is turned OFF after the axis is moved in the "MACHINE LOCK" ON state, the current

position display and the machine position will not match.
If AUTO START is pressed in this state, the difference between the current position and the machine position will be
added to the movement amount.
If RESET is pressed, the current position display will be changed to match the machine position. Thus, after turning
"MACHINE LOCK" OFF, press RESET before starting operation.

6.19 Each Axis Machine Lock

By turning ON the "MACHINE LOCK" switch provided for each axis, machine lock will be applied only on the control axis
(axes) turned ON. All matters, other than the machine lock for each axis, are the same as all axes machine lock.

«
...
478
479
480
481
482
...
»

Содержание E70 Series















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов