Mitsubishi Electric E70 Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 782

Mitsubishi Electric E70 Series Скачать руководство пользователя страница 5

Mitsubishi CNC is designed and manufactured solely for applications to machine tools to be used for industrial
purposes.
Do not use this product in any applications other than those specified above, especially those which are
substantially influential on the public interest or which are expected to have significant influence on human lives or
properties.

Not applicable in this manual.

1. Items related to operation

If the operation start position is set in a block which is in the middle of the program and the program is
started, the program before the set block is not executed. Please confirm that G and F modal and
coordinate values are appropriate. If there are coordinate system shift commands or M, S, T and B
commands before the block set as the start position, carry out the required commands using the MDI, etc.
If the program is run from the set block without carrying out these operations, there is a danger of
interference with the machine or of machine operation at an unexpected speed, which may result in
breakage of tools or machine tool or may cause damage to the operators.

Under the constant surface speed control (during G96 modal), if the axis targeted for the constant surface
speed control moves toward the spindle center, the spindle rotation speed will increase and may exceed
the allowable speed of the workpiece or chuck, etc. In this case, the workpiece, etc. may jump out during
machining, which may result in breakage of tools or machine tool or may cause damage to the operators.

1. Items related to product and manual

For items described as "Restrictions" or "Usable State" in this manual, the instruction manual issued by
the machine tool builder takes precedence over this manual.

Items not described in this manual must be interpreted as "not possible".

This manual is written on the assumption that all option functions are added. Confirm with the
specifications issued by the machine tool builder before starting use.

Refer to the Instruction Manual issued by each machine tool builder for details on each machine tool.

Some screens and functions may differ depending on the NC system (or its version), and some functions
may not be possible. Please confirm the specifications before use.

2.Items related to installation and assembly

Ground the signal cables to ensure stable system operation. Also ground the NC unit main frame, power
distribution panel and machine to one point, so they all have the same potential.

3. Items related to preparation before use

Always set the stored stroke limit. Failure to set this could result in collision with the machine end.

Always turn the power OFF before connecting/disconnecting the I/O device cable. Failure to do so could
damage the I/O device and NC unit.

[Continued on next page]

For Safe Use

DANGER

WARNING

CAUTION

«
...
3
4
5
6
7
...
»

Содержание E70 Series















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов