Mitsubishi Electric E70 Series, Инструкция по эксплуатации

Страница: 243 / 782

4 Edit Screens
MITSUBISHI CNC
I - 218
4.2.7 Changing the Display
Switching the active area is possible only when the multi-program display type is selected.
Press the [<--> change] key to switch the active area between the left and right window.
key:This displays one page of preceding lines of the current top line.
When there is less than one page of data, a page of data will be displayed including the data currently displayed.
(The cursor moves to the last line of the screen. Cursor does not move in mass-editing.)
key:This displays one page of following lines of the current bottom line.
(The cursor moves to the top line of the screen. Cursor does not move in mass-editing.)
The cursor will move up one line in the program each time the cursor key ([ ↑ ],[ ↓ ]) is pressed.
If the [
↓
] key is pressed at the top line of the program display area, the program will scroll up one line.
If the [
↑
] key is pressed at the end, the program will scroll down one line.
When a block is displayed over 2 or more lines, [ ↑ ] [ ↓ ]keys move the cursor by block unit during regular editing and by
line unit during mass-editing.
Switching the active area
Left side is active (can be edited) Right side is active (can be edited)
[<--> change]
Changing the display using the page changeover keys ( : Previous Page, : Next Page)
Changing the display with the cursor key
ً
ۂ
ً
ۂ
Cursor moves in same
display.
Display scrolls without
moving cursor position.
1:N1 G28 X0. Y0. Z0.;
2:N2 G92 X0. Y0. Z0.;
3:N3 G00 X-300.
Y-300. Z-300.;
4:N4 G01 X-200. Y-200.
F2000;
11:N11;
12:N12 Z300.;
13:Y200.;
14:;