Mitsubishi Electric E70 Series Скачать руководство пользователя страница 586

Страница: 586 / 782

E70 Series Instruction Manual

Appendix 6.2 Stop Codes (T)

IV - 53

Appendix 6.2 Stop Codes (T)

T01 Axis in motion 0101

Details

Automatic start is not possible as one of the axes is moving.

Remedy

- Try automatic start again after all axes have stopped.

T01 NC not ready 0102

Details

Automatic start is not possible as the NC is not ready.

Remedy

- Another alarm has occurred. Check the details and remedy.

T01 Reset signal ON 0103

Details

Automatic start is not possible as the "reset" signal has been input.

Remedy

- Turn OFF the "reset" signal.

- Check for any failure of the reset switch which has caused the switch's continuous ON.

- Correct the sequence program.

T01 Auto operation pause signal ON 0104

Details

The feed hold switch on the machine operation panel is ON (valid).

Remedy

- Correct the feed hold switch setting.

- The feed hold switch is B contact switch.

- Fix any broken wires in the feed hold signal line.

- Correct the sequence program.

T01 H/W stroke end axis exists 0105

Details

Automatic start is not possible as one of the axes is at the stroke end.

Remedy

- Manually move any axis whose end is at the stroke end.

- Check for any broken wires in the stroke end signal line.

- Check for any failure in the stroke end limit switch.

T01 S/W stroke end axis exists 0106

Details

Automatic start is not possible as one of the axes is at the stored stroke limit.

Remedy

- Move the axis manually.

- If the axis's end is not at the stroke end, check the parameters.

T01 No operation mode 0107

Details

The operation mode has not been selected.

Remedy

- Select automatic operation mode.

- Check for any broken wires in the signal line for automatic operation mode (memory, tape, MDl).

Содержание E70 Series















































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание E70 Series

Отзывы:

Mitsubishi Electric E70 Series, Инструкция по эксплуатации, Страница: 586 / 782

Результаты поиска

Содержание E70 Series

Отзывы: